Author Topic: welding dissimilar metals  (Read 1758 times)


  • Newbie
  • *
  • Posts: 3
welding dissimilar metals
« on: January 12, 2015, 07:52:20 PM »

Hi Gents,

I'm going to weld 12mm PL grade 350 to S/S 309 with a double bevel, I put the prep on the grade 350 as it was easier to bevel with oxy-cutting.

i was wondering is there any requirements or a preferred  side to prep like if i preped the the S/S i would get better results from bends,hardness,macros etc
Cert 10 AS1796,AS 2214